QuelCoil Continuous Intuwrap is used to maintain the fire rating of walls where they have been penetrated by plastic pipes and/or metallic pipes with combustible insulation.
Next Day Delivery
Fast response to all enquiries
40 years of experience
The product is intended to be wrapped around the outside diameter of the combustible pipework or the outside diameter of the insulation. The tape supplied can be used to secure and hold the QuelCoil in place. Depending on the penetrating service, multiple layers of QuelCoil may be required. The number or layers and the positioning of the QuelCoil is detailed below.
Firstly, check that the pipe and the substrate are clean and clear of any debris. Install the correct number of layers of QuelCoil for the service type ensuring that it is flush to the wall face or flush to the face of the QuelStop Fire Batt.
The QuelCoil Intuwrap should be installed to both sides of the wall or, for applications with double layer or pattress fitted QuelStop Fire Batt, the QuelCoil should be within the thickness of each QuelStop Fire Batt.
Under fire conditions, the QuelCoil Intuwrap expands and fills the void left by the burnt plastic / insulation.
Install QuelCoil Continuous Intuwrap to provide up to 2 hours fire protection to plastic pipes, and insulated pipes where they pass through fire rated walls. Installation to be fully in accordance with the manufacturers instructions.
Should you require any further information regarding this product, please don’t hesitate to contact one of our specialists.