Latest News

How to install an Intumescent Putty Pad in an Electrical Socket Box

How to install an Intumescent Putty Pad in an Electrical Socket Box

How to install an Intumescent Putty Pad in an Electronic Socket Box

How to install an Intumescent Putty Pad in an Electrical Socket Box

Due to popular request, Quelfire’s technical team has put together a quick installation guide for Intumescent Putty Pads.

The application of this product is very quick and easy, there are only a few little details that you need to be careful of.

Please see the steps below:

  1. Remove the socket plate. All surfaces must be clean, free from dirt, grease and other contamination.
  2. Remove the backing paper from the pad.
  3. Insert the pad into the socket back box so that the pad completely covers the back and sides.
  4. Make sure the pad is not damaged or punctured during this process.
  5. Trim off any excess material to leave a neat finish.
  6. Make a slit to allow the wires to pass through the pad and for the fixings so that the socket plate can be replaced.

Hopefully, the above instructions with the illustration will give you confidence in installing the Putty Pad, but if you still have any questions, please feel free to contact us.

More information about Quelfire’s Putty Pads >>