Fire Resistant Expanding Foam Filler

Fire Resistant Expanding Foam Filler | NG

NG Fire Resistant Expanding Foam Filler provides a means of fire stopping gaps in compartment floors and walls. It is particularly useful in uneven shaped joints where pre-formed materials cannot easily be installed.

Features & Benefits

  • Tested to EN 1366-4, EN 13501: Part 2: 2007
  • Up to 4 hour fire rating
  • Suitable for gaps up to 30mm
  • Easy and quick to install
  • Supplied in 750ml canisters


Building Regulations impose limitations on all linear gaps penetrating fire compartment walls and floors. Quelfire Fire Resistant Expanding Foam Filler allows these gaps to meet the requirements of the Building Regulations. NG Fire Resistant Expanding Foam Filler has been tested according to EN 1366-4, EN 13501: Pt 2 : 2007 where gaps of up to 30mm have met insulation and integrity criteria for this standard for up to four hours.

Name: Fire Resistant Expanding Foam Filler


Product Downloads View Product Downloads


NG Fire Resistant Expanding Foam Filler is a modified, single component, fire rated, grey polyurethane foam.


NG Fire Resistant Expanding Foam Filler will not adhere to Teflon, polyethylene or silicone surfaces. The cured foam is adversely affected by UV light and should be covered with a suitable sealant such as QSS QuelStop CE Marked Acrylic Acoustic Intumescent Sealant.

Technical Support & Guidance

Should you require any further information regarding this product, please don’t hesitate to contact one of our specialists.

Application / installation

  1. The surfaces must be dry, solid and stable.
  2. All loose particles, dust and grease must be removed.
  3. The substrate can be moistened to achieve a speedier cure if required.
  4. Shake the canister vigorously at least 20 times.
  5. Leaving the cap on the can screw the nozzle firmly into the connector on the top of the trigger.
  6. Remove the safety catch and pull the trigger to activate the can. Fill approximately half of the required depth of the cavity because the foam will expand.
  7. On horizontal surfaces always work away from the exuding bead and work upwards on all vertical surfaces.
  8. The foam will set in approximately 1 hour (depending on temperature and humidity) then any excess can be trimmed with a sharp blade.

Contact us for Technical Advice


Tested Gap Widths (mm) Substrate & Foam Depth Integrity (minuets) Insulation (minuets)
10 100mm 90 90
20 100mm 60 60
30 100mm 45 45
10 200mm 240 240
20 200mm 180 180
30 200mm 120 120

Have a Query about Fire Resistant Expanding Foam Filler | NG?

For technical queries, general price requests or any other questions about this product, please fill out the form below: